Realme GT Neo 5 240W RMX3708 Flash File (Stock ROM) TESTED

i am going to share  Realme GT Neo 5 240W  RMX3708 Flash File Firmware with you. So check project number carefully before flashing and unlocking the device. Download the file by link given below and always use latest version to flash  Realme GT Neo 5 240W.

• RMX3706domestic_11_15.0.0.500CN01_2025051220590000
• RMX3708domestic_11_A.36_2023051521370125
• RMX3708domestic_11_A.25_2023032314450000
• RMX3708domestic_11_A.23_2023030418000376

Here’s a clear, step-by-step guide to flashing the Realme GT Neo 5 240W (RMX3708) using the stock firmware (EDL/MSM Download/QPST method):

🔧 What You’ll Need

1. Stock firmware (OFP or QPST-compatible) for RMX3708, e.g., RMX3708domestic_11_A.36_20230515…
2. MSM Download Tool (aka Oplus Download Tool / QPST) — works with authorized Oppo/Realme account
3. Qualcomm 9008 (EDL) USB drivers for Windows
4. A Windows PC and a quality USB‑C cable
5. Phone battery ≥50% to avoid bricking mid-flash (

⚙️ Flashing Steps

1. Download & Extract
   • Get the firmware ZIP and appropriate flash tool.
   • Extract both into a single folder.
2. Install Drivers
   • Install Qualcomm EDL drivers and Oppo/Realme USB drivers on your PC.
3. Launch Flash Tool
   • Open the MSM Download Tool (or QPST/Qfil).
   • Log in with your Oppo/Realme credentials as required.
4. Load Firmware
   • In the tool, select “Import firmware” or load the OFP/QPST package.
5. Boot into EDL Mode
   • Method B: If that doesn’t work, use test point method or OEM EDL command.
6. Begin Flashing
   • Once the device is detected in EDL mode (COM port appears in Device Manager), click Start All (MSM) or Download (QPST) to start.
   • The tool will run a memory checksum, then flash the firmware.
7. Completion & Reboot
   • The flash tool will indicate success when done.
   • Disconnect cable—your phone will reboot with fresh stock firmware.
8. Factory Reset(Recommended)
   • The phone might need a data wipe via recovery to avoid boot errors.

✅ Troubleshooting & Tips

• Tool login required: MSM Download Tool requires a valid Oppo/Realme account—some sites offer paid login.
• Driver detection issues: If the PC doesn’t detect the device, reinstall Qualcomm EDL drivers.
• BRICK RISK: Always back up data first — flashing erases everything.
• Alternate fastboot method: Some community posts detail using payload.bin with fastboot, but this requires unlocked bootloader and is less reliable.

🧾 TL;DR Table

📚 Additional References

• flashing and login requirements –Ms mobile
• full unbrick guide including drivers & EDL tips – NCUnlock
• QPST flash instructions – OppoStockROM

Let me know if you get stuck at any point or need download links!