Download Vivo T3 Pro 5G Full Dump Read F64 Box
I cannot provide or distribute any full firmware dumps (full ROM, QCN, NV, USERDATA, BACKUP, etc.) for the Vivo T3 Pro 5G (PD2404HF) because those are copyrighted and device-specific images. However, I can help you understand how to read a Full Dump using F-64 Box (also called F64 Box) safely and correctly.
Below is a step-by-step guide for reading a full dump (secure or non-secure) from Vivo devices like Vivo T3 Pro 5G (PD2404HF) using F64 Box.
📌 Requirements
Before you begin, make sure you have:
- F64 Box with latest firmware
- F-64 Setup / Tool installed on your PC
- Qualcomm drivers installed
- USB cable & stable connection
- Battery ≥ 50%
🔧 Step-by-Step: Read Full Dump (EDL / Reset / Read)
1. Install Drivers
Install the latest Qualcomm HS-USB drivers:
- Windows x64
- Restart PC after installation
2. Open F64 Tool
Launch your F-64 application on your Windows PC.
3. Put Phone in EDL Mode
There are two common ways:
✔ Test Point Method
- Open back cover (if applicable)
- Short specific EDL test points to force EDL
✔ ADB Fastboot to EDL
From fastboot:
fastboot oem edl
or
adb reboot edl
Phone screen will be black, detected as Qualcomm HS-USB QDLoader 9008
4. Connect Phone
Connect with a USB cable.
In Device Manager → Ports it should show:
Qualcomm HS-USB QDLoader 9008
If driver not installed, it shows as “Unknown Device” — install Qualcomm driver.
🛠️ In F64 Box
A) Detect Phone in EDL
- In F64, click Detect
- It should display the Qualcomm device
📌 If detection fails → Reinstall drivers / use different USB port
B) Read Dump
Usually you will see options like:
✔ Read FullDump
✔ Read Partition
✔ Read EFS / QCN / NV / USERDATA
Select Read FullDump.
👉 If tool asks for Rawprogram0.xml / Patch0.xml, you may need to generate these first (explained below).
C) Start Reading
Click Start / Read / GO
Wait until the process is complete — this may take several minutes.
Do not disconnect during read.
📦 Saving the Dump
After completion you will get a folder with files such as:
✔ rawprogram0.xml
✔ patch0.xml
✔ all .bin sections
✔ emmc_appsboot.mbn
✔ efs / nv / qcn (if selected)
🛠️ Creating RawProgram / Patch Files
F64 Box Tools usually have an option:
📌 Build XML / Generate XML
- Select the phone storage layout
- Generate rawprogram0.xml and patch0.xml
This is needed if automatic read fails.
⚠️ Important Notes
❌ I cannot give or share firmware dumps here.
✔ Use read dumps only for repair and backup purposes
✔ Keep backups safe
✔ Do not distribute or upload dumps publicly
🧠 Common Errors & Fixes
| Error | Cause | Fix |
|---|---|---|
| 9008 not detected | Driver issue | Reinstall Qualcomm drivers |
| Read failed midway | Bad cable | Use high-quality USB cable |
| Partition read error | Unsupported type | Update F64 Box firmware |
| Security error | Locked boot | Use proper authentication files |
🔍 Summary
To read a full dump from Vivo T3 Pro 5G (PD2404HF):
- Install Qualcomm drivers
- Put phone in EDL
- Connect, detect in F64
- Generate necessary XML
- Read Full dump
- Save dump files securely
If you tell me which parts you specifically need (e.g., EFS, QCN, NV, full raw dump), I can give you a more precise guide for that.