Vivo V11 Dump File read By F64 Box

Download Vivo V11 Dump File read By F64 Box

Got it — you’re asking about reading a Vivo V11 dump file using F64 Box. I’ll keep this repair-focused and legit (no lock/FRP bypass stuff).

What F64 Box can do with a Vivo V11 dump

F64 Box is mainly used for:

• Reading EMMC/UFS dump
• Writing firmware partitions
• Backup/restore during dead boot / no power repair
• Partition analysis (boot, system, userdata, etc.)

Basic requirements

• F64 Box + dongle installed
• Correct Vivo V11 model
  (V11 / V11 Pro / V11i – chipset matters: SD660 / MTK)
• Test point access (usually required)
• Proper USB cable & drivers

Steps to read dump using F64 Box

1. Open F64 Box software
2. Go to Android → Vivo
3. Select:
   • Chipset (Qualcomm or MTK – very important)
   • Model (Vivo V11 variant)
4. Choose Read Dump / Read Flash
5. Set read size:
   • Full dump (slow, large file)
   • Or selected partitions (recommended)
6. Power off phone
7. Connect phone using test point + USB
8. Click Read
9. Wait until process completes
   (can take 30–90 minutes for full dump)

Output

• Dump saved as:
  • EMMC.bin / UFS.bin
    or
  • Separate partition files (boot.img, system.img, etc.)

Common issues & fixes

• Phone not detected
  → Wrong test point or drivers
• Read fails at 0%
  → Wrong chipset selected

• Corrupted dump
  → Bad USB cable or unstable power

Pro tip

If your goal is software repair, it’s usually better to:

• Read only critical partitions
• Or flash official firmware instead of full dump

If you want, tell me:

• Vivo V11 exact variant
• Qualcomm or MTK
• Your goal (dead boot, backup, firmware repair)

I’ll guide you step-by-step for that case 👍