Download Oppo A5 CPH1809 latest flash file version A.39 from Ms mobile institute and flash your phone for removing all screen locks and fix hang on logo problem. always use latest firmware for flash. Oppo A5 flash tool required login credential to run, if you don’t have then contact me for flash. it’s paid service.
Smartphone deals
Download Oppo A5 CPH1809 Flash File:
Here’s a streamlined process for flashing your OPPO A5 5G (CPH2751) using Qualcomm-based tools—tailored for users with bricked or bootlooping devices:
⚙️ Prepare
- Charge your phone to ≥ 50% – essential to prevent failures during flashing (web.theupspot.com).
- PC Requirements:
- Windows PC
- USB cable (high-quality)
- Qualcomm USB drivers (VCOM)
- QFIL (Qualcomm Flash Image Loader) or QPST/MSM Download Tool
- Firmware & Tools:
- Stock firmware for CPH2751 if available; otherwise use firmware intended for CPH2751 in QFIL or as
.ofpfor MSM Tool - Scatter file (for QFIL) or
.ofpfor MSM Tool
- Stock firmware for CPH2751 if available; otherwise use firmware intended for CPH2751 in QFIL or as
🔧 Flash via QFIL (Qualcomm Flash Image Loader)
- Install Qualcomm drivers so your phone is recognized in EDL or Download mode
- Launch QFIL as Administrator.
- In QFIL:
- Load “rawprogram0.xml” via “Browse” > select your firmware folder
- Load “patch0.xml”
- Power off your device completely.
- Press and hold both Volume Up + Power, then connect to USB to enter EDL mode
- QFIL should detect the device—showing a COM port. Click Download.
- Wait patiently. Flashing takes ~10–15 min
- Once completed, the phone will reboot. If stuck, do a factory reset via stock recovery.
⚠️ If QFIL Doesn’t Detect Device
- Check drivers: Use Device Manager → Qualcomm HS‑USB QDLoader
- Ensure you’re in EDL mode: it’s Qualcomm’s emergency download mode
- Manual EDL entry: Bridge test points or hold Vol Up + Vol Down + power during USB connection (web.theupspot.com, reddit.com)
- Try again until QFIL shows a COM port (reddit.com)
🛠 Alternative: MSM Download Tool
- Use stock
.ofpfirmware - Launch MSM Download Tool
- Load firmware package
- Power off device, hold both Volume Up + Volume Down, plug USB
- Tool should detect phone—click Start (gsmmafia.com, reddit.com, xdaforums.com, reddit.com)
- Wait until it finishes, then reboot
✅ After Flashing
- First boot may take 5–10 minutes
- If stuck on boot logo, perform a factory reset via Recovery
📝 Summary Table
| Step | Action |
|---|---|
| 1 | Charge ≥ 50%, install Qualcomm drivers |
| 2 | Download stock firmware + tools (QFIL/MSM) |
| 3 | Use QFIL: load XMLs → power off → Vol Up + Power while USB → Download |
| 4 | If no detection: force EDL by pin bridge or Vol Up + Vol Down + Power |
| 5 | Or use MSM Tool with .ofp: hold both Vol buttons during USB connect |
| 6 | Wait for success, then reboot → factory reset if needed |
🔁 EDL Mode Recap
EDL (Emergency Download Mode) is Qualcomm’s serial flashing protocol.
- Typically: Vol Up + Power
- If that fails: bridge test points on the board during connection
📌 Important Tips
- Backup any personal data before flashing.
- Use the exact firmware for CPH2751 if possible (even if only generic Oppo A5, it still works).
- Drive installer as Administrator.
- Use official sources (e.g. Oppo/XDA) for firmware and drivers when possible.
¿Need direct download links for firmware or help identifying CPH2751 files? Happy to assist!
