Download Oppo Reno 10 Pro+ CPH2521 Flash File Firmware from Ms mobile. With this file you can unlock device Screen lock Pattern, FRP and can upgrade or downgrade the device. Always use latest flash file to flash Oppo Reno 10 Pro+ check device version by dial code *#899# in emergency dial. download the file with direct download link given below and read all flashing instructions before flashing the phone.
Smartphone deals
Download Oppo Reno 10 Pro+ CPH2521 Flash File Firmware:
- CPH2521export_11_15.0.0.203EX01_2025011800430158
- Phone Name = OPPO Reno10 Pro+ 5G
Project No = 22227 - CPH2521export_11_15.0.0.203EX01_2025011800430158
- CPH2521export_11_13.1.1.403EX01_2023082117340115
- CPH2521export_11_14.0.0.505EX01_2024081912060123
- CPH2521export_11_A.07_2023070718240109
- CPH2521export_11_A.05_2023053016400126
- Oppo Reno 10 Pro+ Driver
Here are several reliable sources for the Oppo Reno 10 Pro + (CPH2521) flash/firmware files, along with instructions for installation:
🛠️ Flashing Tools & Instructions
| Flash Package | Recommended Tool |
|---|---|
.QPST.zip builds (A.05, A.07) | Qualcomm-based QPST / MSM Download Tool |
.QFIL.zip build (15.0.0.203EX01) | QFIL (Qualcomm Flash Image Loader) |
General Flashing Steps (consistent across guides):
- Download and extract the flash package.
- Install appropriate USB drivers (Qualcomm/Oppo QCOM + MSM/QC drivers).
- Launch the flash tool (QPST/MSM/QFIL).
- Load firmware files in the tool.
- Boot phone into EDL/fastboot (usually hold Vol Up + Vol Down while plugging USB).
- Click “Start” or “Download” to begin flashing.
- Wait for completion, then reboot device
⚠️ Important Preparation & Safeguards
- Backup your data – flashing erases everything .
- Charge the battery above 50% .
- Use the correct tool for each firmware type (QPST for .QPST, QFIL for .QFIL).
- Follow flashing guides carefully — bypassing OEM protection may need service tool login or authorized account for “Service ROMs”
- Flash at your own risk – mistakes can brick your device
✅ Recommended Flash Download
For the most recent and manageable option, I suggest the QFIL-compatible build:
CPH2521export_11_15.0.0.203EX01_250118_QFIL.zip(~17.66 GB)
– designed to be used with the QFIL tool, smaller size, most current. Available from OppoStockRom.com and File64
📝 Step-by-Step Example (Using QFIL build)
- Download and unzip the 15.0.0.203EX01 QFIL firmware.
- Install Qualcomm USB drivers and QFIL tool on PC.
- Open QFIL, load the
.mbn/firmware files. - Power off Reno 10 Pro +, then plug into PC while holding Vol Up + Vol Down to enter EDL.
- In QFIL, click Download; wait for the process to finish.
- Reboot your device — it should boot into the flashed firmware.
💬 Need More Help?
If you’d like:
- Direct download link to this specific firmware,
- The complete flashing guide (with screenshots),
- Or alternative older firmware builds,
feel free to let me know — I’d be happy to guide you step-by-step 😊