Download Vivo S1 Pro UFS Easy Jtag Dump File
I cannot provide or share a UFS Easy-JTAG dump file for the Vivo S1 Pro or any other device. Dump files contain proprietary firmware and software that are owned by the manufacturer, and sharing them violates intellectual-property and device-security policies.
However, I can help you understand how to properly create a dump yourself, how Easy-JTAG works, and where to find official firmware that you can legally use for repair or unbricking.
✅ What Is an “Easy-JTAG UFS Dump”?
A UFS dump is a bit-for-bit read of the internal storage of a phone (the UFS memory). It’s used for:
- Full system backups
- Unbricking devices
- Recovery when bootloader is corrupted
- Repairing IMEI, NV data
- Firmware recovery
To get a dump from a UFS storage device, you need:
- A hardware programmer (e.g., Easy-JTAG, Medusa, UFI)
- Correct test point access or board-off method
- The correct loader/firmware for your model
⚠️ This requires advanced hardware knowledge and risk of bricking if done incorrectly.
✅ How to Create Your Own Dump (Conceptually)
- Open Easy-JTAG Software
- Make sure it’s the latest version that supports Vivo UFS NAND.
- Connect to the Phone
- Use test points or direct UFS pad access depending on phone model.
- For many Vivo phones this means board-off connection.
- Select Correct Chip & Interface
- Select the correct UFS chip and Vivo S1 Pro board configuration.
- If not supported, Easy-JTAG may not read the dump.
- Start a UFS Read
- Use Read Full UFS or Dump option.
- It will extract eMMC/UFS dump to your PC.
- Save the Dump
- It produces a
.ufsor.rawfile depending on software.
- It produces a
📌 Important Safety Tips
✔️ Always backup your dump before writing anything.
✔️ Never write a dump you didn’t generate yourself — using another phone’s dump can permanently brick your device.
✔️ Only use loaders and firmware from vendors with legitimate support.
✔️ Wrong dump & write can permanently damage the UFS.
📥 Where to Find Official Firmware
You can download stock firmware directly from official and legitimate sources:
☑️ Vivo Official Support
- Vivo support site often has official firmware downloads.
☑️ Firmware Repository Sites
Search for your exact model:
Vivo S1 Pro official firmware
Vivo S1 Pro PD-xxx global ROM
Make sure it matches:
- Model (e.g., V1972, V1971, etc.)
- Region (India, China, Global)
- Android version
⚠️ Do NOT download random dumps circulating on forums, they can be modified/malicious.
📌 Easy-JTAG Notes
Easy-JTAG works by communicating with the phone’s storage chip via hardware:
- Requires a hardware box (Easy-JTAG Plus, Pro, etc.)
- Needs correct loader files for each model
- May need specialized adapters for Vivo UFS devices
If your model is not yet supported, Easy-JTAG will not be able to read the UFS.
🛠 If You Need Guides
I can provide detailed guides for:
📌 How to identify UFS chip on Vivo S1 Pro
📌 How to find test points
📌 How to set up Easy-JTAG loader
📌 How to read and restore dumps
Just tell me:
❓ “Show me test points for Vivo S1 Pro”
❓ “How to use Easy-JTAG for UFS dump”
❓ “Where to find official Vivo S1 Pro firmware”
If you want step-by-step help with any of the above, tell me what part you’re stuck on!